Two development trends of the hottest global pre c

2022-09-30
  • Detail

Two development trends in the global pre coating industry

the birth of pre coating was about 1989. It was first widely used in European and American countries, and it did not enter Asia until 1996. At the same time, European and American countries that previously used pre coating technology have announced that the use of instant coating has been banned and changed to pre coating. Due to the late use of pre coating technology in Asia, the share of pre coating in many Asian countries is not very high through computer experiments. At present, Japan has all used pre coating, and other countries, such as China and South Korea, are in the state of both pre coating and coating

and it is almost unaffected by temperature, humidity and frequency. The data show that pre coating, as an environmental friendly post press coating technology, has been widely used in developed countries. In 1996, the United States realized the comprehensive substitution of pre coating technology for instant coating technology, and the current market share is 95%. As Europe is the birthplace of water-based instant coating technology, the promotion of pre coating in this place was slow at first, but its market share has increased steadily in recent years, reaching 65% at present. The expanded Wertheim plant in Japan and South Korea began to promote pre coating in the 1990s. At present, the market utilization rate has reached about 70% and 50% respectively

the application of pre coating technology in China is relatively backward, and it is still in the primary stage since it was used in 2000. According to the statistics of 2008, the proportion of pre coating market in China is less than 10%. Among them, solvent based instant coating technology is used most, accounting for 68%. In addition, water-soluble instant coating technology also accounts for about 20%

due to the two development trends of the global pre coating industry, we can see that the market prospect of pre coating is broad, and it is inevitable to replace the instant coating technology as the mainstream trend. However, at present, countries and regions with low utilization rate are still in the period of replacement and development of pre coating technology. Many manufacturers in Asia have realized the great potential of the pre coating market. To sum up, the introduction of the performance and precautions of the tensile testing machine will inevitably gradually reduce the mainstream position of European and American manufacturers. Global pre coating costs will also fall

pre coating has a good market development prospect, which is closely related to its downstream industry. Without a certain demand, it is impossible to create a market myth. The downstream industry of pre coating is the printing industry, including industrial printing market, commercial printing market and special purpose market. In the field of industrial printing, China has maintained an average growth rate of more than 10% in recent years; In the field of commercial printing, only card cards and poster advertising light boxes are widely used at present. Digital printing, Digital Express Printing and other businesses are also emerging and developing. It is estimated that in 2010, the share of the global digital printing industry in the printing market will rise to 20% - 25%, and the annual growth rate will also exceed 16%. It is inevitable to develop professional digital pre coating, which will also provide huge development space for the pre coating industry

at present, pre coating technology is not simply applied to the field of printing and packaging. Many international pre coating manufacturers have successfully applied it to special industries, such as new building insulation materials in the construction industry, new insulation materials in the electronic industry, etc., which also expands a broader development space and new development direction for the pre coating and laminating industry

Copyright © 2011 JIN SHI